Tools

NPC-1 Setup Tool
This software tool is designed for easy setup of the IP address, subnet mask, and gateway address through the RS232 port of the NPC-1 device. The application runs only as a console application. It needs to be executed in a command prompt shell.

Download NPC-1 Setup Tool
	Download NPC-1 Setup Tool

Instructions

1. Copy the npcsetup.exe, the .dll file and the readme.txt files to a new directory under your root directory (e.g. C:\npcsetup\).
   
   
2. Please use a null modem cable to connect the serial port of the NPC-1 device to a free serial port of your computer.
   
   
3. Set DIP SW1 to "ON". The DIP switches are located on the front panel of the NPC-1 device.
   
   
4. Run the setup application.
   Usage : C:\npcsetup\npcsetup.exe COMPort [BaudRate]
   Example: C:\npcsetup\npcsetup.exe COM1 19200
   
   
5. Press <Enter> key to start the configuration process or <Ctrl>+C to quit.
   
   
   

Attention:
Please make sure that you use a free serial port on your computer. Connect the NPC-1 and your PC with a null modem cable.